Kenwood MDX-G1 - Manual (Page 5)

5 EN
Preparation
section
÷ Be sure to insert each connection cord securely. If a cord is plugged in incompletely, audio may not
be output or noise may be generated.
÷ Before connecting or disconnecting any connection cord, be sure to first unplug the power cord
from the wall power outlet.
÷ Do not install the speakers near a TV set. Otherwise, color irregularities due to magnetism may be
observed on the TV screen.
÷ Be sure to put the unit to the STANDBY mode (page 63) before unplugging the power cord.
Continued on next page \
÷ When removing the power cord connection,
unplug the power plug of the wall outlet
first.
The provided antenna has
been designed for indoor
use. Place it in a position as
apart as possible from a TV
and power cords and orient
it to obtain the best receiv-
ing condition.
Connecting the accessories
POWER cord
To an AC wall outlet
AM loop antenna
Antenna assembly
method
Extend the FM antenna and
orient it to obtain the best re-
ceiving condition possible.
FM rod antenna
*5053/04-09/EN 5/29/01, 10:56 AM 5