Receiving non-preset broadcast stations – Kenwood MDX-G1 User Manual

Page 15

Basic

section

Receiving non-preset broadcast stations

A radio station can be tuned either by auto tuning or manual tuning according to the current
reception condition.

(1)

Press the SET/TUNING MODE key on the main unit (or the REPEAT/AUTO/MANU. key
on the remote) to select AUTO or MANUAL tuning mode.
When “AUTO” is lit

: Indicates the auto mode (stereo reception) which is suitable

when the receiving condition is good.

When “AUTO” is not lit : Indicates the manual mode (monaural reception) which is suit-

able when the receiving condition is poor.

÷ Usually leave “AUTO lit (auto tuning mode, stereo reception).

(2)

“AUTO” or “MANUAL” is displayed when you press SET/TUNING MODE key, then
press the

4/TUNINGﬁ or %TUNING/¢ key on the main unit to receive the de-

sired station.
Pressing the

1 TUNINGﬁ or ¡ TUNING% key on the remote will enable you to

select the desired station.
Auto tuning

: Each press of the key tunes the next station automatically.

Manual tuning : Press and hold the key until the next station is tuned.

÷ When the unit is in STANDBY mode (page 63), simply pressing the TUNER FM/AM key (or the FM/

AM key on the remote) switches the power ON and radio reception starts automatically. (One-
touch operation)

÷ During tuning, pressing and holding the 4/TUNINGﬁ or %TUNING/¢ key on the main unit (or

the

1 TUNINGﬁ or ¡ TUNING% key on the remote) makes it possible to skip undesired

stations that may be received before the target station.

“TUNED” lights when a station is received

Frequency display

“AUTO” lights in auto tuning mode

“STEREO” lights during stereo reception

EX. BASS

MHz

TUNED

AUTO

*5053/10-19/EN

5/29/01, 10:56 AM