Kenwood MDX-G1 - Manual (Page 4)

4 EN
System connection
Power cord (1) Remote control unit (1) Batteries (R6/AA)
for remote (2) AM loop antenna (1)
Loading batteries in the remote control unit
÷ The provided batteries are intended for use in operation checking, and their service life may be
short.
÷ When the remote-controllable distance becomes short, replace both of the batteries with new
ones.
÷ If the remote sensor on the main unit’s front panel is exposed to direct sunlight or the light of a
high-frequency fluorescent lamp (inverter type, etc.), malfunction may occur. In such a case, change
the installation position to avoid malfunction.
÷ When pressing more than one remote control keys successively, press each key securely by leav-
ing an interval of 1 second or more between keys.
÷ The standard remote-control range is within approximately 6 meters from the main unit’s front
panel. Be sure to point the remote to the remote sensor on the front panel.
(2) Insert two R6(“AA”)-size batter-
ies following the polarity indi-
cations.
(1) Remove the battery com-
partment cover of the re-
mote.
Unpacking
Unpack the unit carefully and make sure that all the accessories are present.
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer
immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood
recommends that you retain the original carton and packing materials in case you need to
move or ship the unit in the future.
Keep this manual handy for future reference.
remote sensor
MD PERSONAL STEREO SYSTEM
DISC LOADING MECHANISM
STANDBY /TIMER
ON/STANDBY EJECT
ONE
RANDOM
PGM
REPEAT
TRACK NO.
SLEEP
DISC
O.T.T. PROG.
TOTAL O.T.E.
HIGH-SPEED
AUTO TUNED SP REC
LP BEST HITS
EX. BASS MD-EDIT
LOUD kHz
MHz
MD MD
CD CD
(3) Attach the battery com-
partment cover.
*5053/04-09/EN 5/29/01, 10:56 AM 4