Kenwood MDX-G1 - Manual (Page 35)

35 EN
Application
section
MD edit
0
Press the
)EJECT key on the
main unit to eject the MD.
“MD WRITING” is displayed.
To stop title input in the middle :
Press the MD EDIT key any time before the
end of step
8. Editing can also be canceled
provided that it is attempted before “MD
WRITING” is displayed. For the procedure,
see “Canceling editing” (page 44).
Changing a title
(1) Perform steps
1 to 4 of “Assigning a
title to a disc or track” (page 34).
(2) Press the 1 or ¡ key repeatedly
to select the character to be changed.
(3) Press the CLEAR/DELETE key to clear
the character to be changed.
(4) Perform steps 5 to 0 of “Assigning a
title to a disc or track” (page 34).
Deleting a title
(1) Perform steps 1 to 4 of “Assigning a
title to a disc or track” (page 34).
(2) Press the CLEAR/DELETE key to de-
lete the title characters.
All of the titles can be deleted at once
by selecting “ALL ERASE” in step
3
of “Assigning a title to a disc or track”
(page 34).
÷ Be careful not to switch the power off or ap-
ply shock or vibrations to the system while
“MD WRITING” is displayed.
÷ If the character to be changed is not dis-
played, press the 1 or ¡ key to move
the cursor and display the previously hidden
characters.
÷ If you want to input a track title while listen-
ing to it, play the track to be titled before per-
forming step
2 in “Assigning a title to a disc
or track” (page 34).
÷ The number of characters that can be input
is 1792 characters per disc or 80 characters
per track title (including “LP:”).
*5053/34-44/EN 5/29/01, 11:00 AM 35