Kenwood TK-5310 - Manual (Page 57)

49
• System Search (SRC)
Press this key to view the current Trunking site. With
the site displayed, press and hold the System Search
key again to enter Search mode. The transceiver begins
searching for a new site and on K2/K3/K5/K6/K7 model
transceivers, “SEARCH” appears on the display. When a
site is found, searching ends and the transceiver switches
to the new site.
• Tactical Group (TAC)
Press and hold this key for second to register the
selected channel as a Tactical Group channel. Press and
hold this key for 3 seconds to register all channels within
the current zone as Tactical Group channels.
• Talk Around (TA)
Press this key to toggle Talk Around ON and OFF. Talk
Around redirects the transceiver signals directly to other
party members rather than relaying the signals through a
repeater.
• Talkgroup (TGR)
Refer to “M
AKINg
g
ROUp
C
ALLS
” on page 2.
• Tone (TON)
Press this key to toggle the transceiver audible tones ON
and OFF.
• Vibrator (VIB)
Press and hold this key for second to toggle the vibrator
function ON and OFF. When the vibrator is on, the
transceiver will vibrate when a call is received.
• VOX (VOX)
Refer to “VOICE OPERATED TRANSMISSION (VOX)” on
page 4.
• Zeroize (ZER)
Press and hold this key for the pre-programmed zeroize
delay time, to delete the Encryption key.