Kenwood TK-5310 - Manual (Page 39)

3
■
Reviewing Messages in the Stack Memory
1 Press and hold the key programmed as Selcall, Status,
or Selcall + Status for second to enter Stack mode.
• The last received message is displayed with the message
number.
2 Press the Side 2 and Side 3 keys to select the desired
message.
3 Press the Side 1 key to return to normal operation.
• To delete the selected message, press the B or # key. To
confirm the deletion, press the B or # key again.
• To delete all messages, press and hold the B or # key for
second. To confirm the deletion, press the B or # key
again.
S
hort
m
eSSAgeS
To send a short message, you must connect the transceiver to
a PC. Ask your dealer for details.
• Short messages can contain a maximum of 48 characters.
• On K2/K3/K5/K6/K7 model transceivers, received short messages
are displayed the same as Status messages and are stored in the
same stack memory. A combined maximum of 5 Status calls and
short messages can be stored in the stack memory.
l
ong
m
eSSAgeS
To send and receive long messages, you must connect the
transceiver to a PC. Ask your dealer for details.
• Long messages can contain a maximum of 4096 characters.
gpS r
eport
To send your location data, you must first connect a GPS
microphone to the transceiver. GPS data can be transmitted
using of 5 methods: auto transmission, upon request, manual
transmission, upon pressing/releasing the PTT switch, and
during emergency mode. Ask your dealer for details.