Kenwood TK-5310 - Manual (Page 40)

32
DTMF (DUAL TONE MULTI FREQUENCY) CALLS
Note: DTMF calls can be made only in Conventional FM
Operation.
m
Aking A
dtmF c
All
■ Manual Dialing (K3/K6 Models Only)
1 Press and hold the PTT switch.
2 Enter the desired digits using the DTMF keypad.
• The corresponding DTMF tones sound each time you
press a key.
• If you release the PTT switch, transmit mode will end even
if the complete number has not been sent.
■
Keypad Auto PTT (K3/K6 Models Only)
If your dealer has activated the Keypad Auto PTT function,
simply press the keys on the keypad to make the call.
• The DTMF code will be sent automatically when you press a
key.
■
Store & Send (K2/K3/K5/K6/K7 Models Only)
1 Enter the desired digits using the DTMF keypad.
• The digits appear on the display as you enter them.
• On K2/K5/K7 model tranceivers, you can enter digits by
using the Side 2 and Side 3 keys. Press these keys to
cycle through the DTMF digits.
• You can enter up to 3 digits before transmitting.
2 After entering the complete number, press the PTT
switch to transmit.
Note: If you switch the power OFF before transmitting the
number, the number will be cleared.