Kenwood TK-5310 - Manual (Page 21)

3
d
iSplAy
(k2/k3/k5/k6/k7 m
odelS
o
nly
)
Indicator Description
The number of bars indicates the strength of
incoming signals. The antenna plus 3 bars
represents a strong signal while only the antenna
represents a weak signal. No antenna means
no signal is present. On Trunking channels, the
antenna indicator flashes while searching for a
control channel.
Appears when the current zone (left icon) or
channel (right icon) is added to the scanning
sequence.
Appears when you are using Scan mode.
Appears when the current channel is programmed
as a Priority channel. “P” represents Priority
channel . “P2” represents Priority channel 2.
“PP” represents priority channels and 2.
Appears when low transmit power is selected. “HI”
appears when using high transmit power.
Appears when the key lock function is activated.
Appears when there is a message stored in
the transceiver memory. Flashes when a new
message has arrived.
Displays the current battery power status.