Kenwood TK-5310 - Manual (Page 20)

2
!0 PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
!1 Side 2 key
Press to activate its programmable function {page 5}. Acts
as an Up key for certain transceiver settings.
!2 Side 3 key
Press to activate its programmable function {page 5}. Acts
as a Down key for certain transceiver settings.
!3 Display (K2/K3/K5/K6/K7 models only)
Refer to the display on page 3.
!4 A key (K2/K3/K5/K6/K7 models only)
Press to activate its programmable function {page 5}. The
programmed name appears on the bottom of the display.
!5 B key (K2/K3/K5/K6/K7 models only)
Press to activate its programmable function {page 5}. The
programmed name appears on the bottom of the display.
!6
Press to activate its programmable function {page 5}. The
programmed name appears on the bottom of the display.
Also acts as a Down key for certain transceiver settings.
!7 D> key (K2/K3/K5/K6/K7 models only)
Press to activate its programmable function {page 5}. The
programmed name appears on the bottom of the display.
Also acts as an Up key for certain transceiver settings.
!8 Keypad (K3/K6 models only)
Press the keys on the keypad to send DTMF tones. The
keypad keys can also be programmed with secondary
functions {page 5} if a programmable function keys is
programmed as Function.
!9 Universal connector
Connect the (optional) speaker/ microphone here.
Otherwise, keep the supplied cap in place.