Kenwood TK-5310 - Manual (Page 25)

7
Programmable Function Con FM Con P25
Trunk
P25
Status ,5 ✓ Mix ✓
System Search N/A N/A ✓
Tactical Group ✓ Mix N/A
Talk Around ✓ ✓ ✓
Talkgroup Mix ✓ N/A
Tone ✓ ✓ ✓
Vibrator ✓ ✓ ✓
VOX ✓ ✓ ✓
Zeroize ✓ ✓ ✓
Zone Down ✓ ✓ ✓
Zone Select 7 ✓ ✓ ✓
Zone Up ✓ ✓ ✓
2-tone, Autodial, Clock, Display Character, Individual, Key Delete,
Light, Operator Selectable Tone, OST Down, OST Up, Scan
Program, Scrambler/ Encryption Code, Selcall, Selcall Status,
Squelch Level, Status, and Talkgroup are available only on K2/K3/
K5/K6/K7 model transceivers.
2 Channel Select can be programmed only on the Selector knob.
3 Emergency can be programmed only on the Auxiliary (orange) key
and the optional speaker/ microphone PF (orange) key.
4 Playback is available only if the VGS- optional board has been
installed.
5 Selcall, Selcall + Status, Send the GPS data, and Status cannot be
used when the transmit mode is set as Conventional P25.
6 Speaker Attenuation can be programmed only on the microphone
programmable function keys.
7 Zone Select can be programmed only on the Selector knob, the
Concentric switch, and the Lever switch.