Kenwood TK-5310 - Manual (Page 43)

35
r
eceiving A
t
elephone
c
All
1 When a call is received, a ringing tone will sound and
“PHONE CALL” will appear on the display.
• If the vibrator function is on, the transceiver will vibrate when a
call is received.
2 Press and hold the PTT switch to speak, and release it to
receive.
• Only one person can speak at a time.
m
Aking A
S
tAtuS
c
All
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status
mode.
3 Press the Side 2 and Side 3 keys to select the status ID
you want to transmit.
4 Press the PTT switch or the key to initiate the Status
call.
• After the status call has been successfully received by the
called unit, “COMPLETE” appears on the display.