Kenwood TK-5310 - Manual (Page 56)

48
• Selcall + Status (SES)
Refer to “FleetSync: ALPHANUMERIC 2-WAY PAGING
FUNCTION” on page 28.
• Send the GPS data (GPS)
Press this key when the GPS unit has been installed to
send your positioning data to the base station.
• Site Lock (SIT)
Press this key to lock the current site. The transceiver
cannot search for alternate sites, and on K2/K3/K5/K6/K7
model transceivers, “SITE LOCK” appears on the display.
Press and hold the Site Lock key for 2 seconds to unlock
the transceiver to allow roaming again.
• Speaker Attenuation
Press this microphone key to attenuate received voice
signals. This reduces the strength of the speaker output to
cut back any noise and distortion present in the signal.
• Squelch Level (SQL)
Press this key to adjust the transceiver squelch level.
When adjusting the squelch level, use the Side 2 and
Side 3 keys or the D> and keys to increase and
decrease the squelch level from 0 (open) to 9 (tight). The
default setting is 5.
• Squelch Off (MON)
Press this key to turn the transceiver squelch off, to better
hear weak signals on the channel. Press the Squelch Off
key again to turn the transceiver squelch back on.
• Squelch Off Momentary (MON)
Press and hold this key to momentarily turn the transceiver
squelch off. Releasing this key turns the transceiver
squelch back on. While squelch is off, you can better hear
weak signals on the channel.
• Status (STS)
Refer to “FleetSync: ALPHANUMERIC 2-WAY PAGING
FUNCTION” on page 28 and “M
AKINg A
S
TATUS
C
ALL
” on
page 35.