Kenwood TK-5310 - Manual (Page 28)

20
t
rAnSmitting
For Trunking channels, refer to “Making Group Calls” and
“Making Individual Calls” on the following pages.
1 Select the desired zone and channel using the selector
knob and the Zone Up/ Zone Down or Channel Up/
Channel Down keys.
2 Press the key programmed as Monitor or Squelch Off to
check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
• The LED indicator lights red while transmitting and green while
receiving a signal. This indicator can also be disabled by your
dealer.
• For best sound quality at the receiving station, hold the
microphone approximately .5 inches (3 ~ 4 cm) from your
mouth.