Kenwood TK-5310 - Manual (Page 52)

44
ADVANCED OPERATIONS
Your transceiver operations vary according to the functions
that your dealer has programmed onto the transceiver keys.
Following is brief overview of the programmable functions.
Refer to those functions which have been programmed onto
your transceiver.
• 2-tone (2TN)
Press this key to display the list of 2-tone codes that has
been pre-stored in your transceiver memory. While viewing
the 2-tone list, press the Side 2 and Side 3 keys to select
your desired code, then press the PTT switch to make the
call.
• Autodial (AD)
Refer to “A
UTODIAL
” on page 33.
• AUX (AUX)
Press this key to toggle the auxiliary port ON and OFF.
When toggled on, the optional feature connected to the
auxiliary port will be activated, and on K2/K3/K5/K6/K7
model transceivers, the icon will appear on the display.
• Battery Status (BAT)
Press this key to view the battery power status. Battery
status is represented by the number of times the LED
indicator flashes red. Five flashes represents high power,
4 represents medium power, 3 represents low power, and
2 represents very low power. If the LED flashes red only
time, recharge or replace your battery pack immediately.
When the Low Battery Warning function is active {page 52}
and the battery power is low, this key will not operate.
• Channel Down (CHt)
Press this key to decrease the channel number {page 9}.
• Channel Recall (RCL)
Press this key during Scan to return to the last called zone
and channel.