Connecting to your wireless network later – Kodak Digital Photo Frame User Manual
Page 14
7
www.kodak.com/go/support
Setting up for wireless operation
NOTE: The screen identifies your security as either WEP or WPA.
A WEP security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive)
10 or 26 characters (0-9, A-F, not case sensitive).
A WPA key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
IMPORTANT: Do not select Scan now (to verify connections,
) until you have
installed the software.
3 If you haven’t done so already, install the KODAK EASYSHARE Digital Display
Software on your WINDOWS OS computer (see
) so you can set up and
customize your frame right from your computer wirelessly. For MAC OS users, see
Connecting to your wireless network later
If you chose not to connect to your network when you first turned on your frame, you
can do it at any time. Here’s how.
1 Tap Home
→
Settings
.
2 Slide to highlight Network, then tap Select.
3 Highlight Scan for wireless networks, then tap OK.
4 Follow the screen prompts and continue with step
on