Kodak Digital Photo Frame - Manual (Page 12)

5 www.kodak.com/go/support
2
Setting up for wireless
operation
To allow your frame to access the contents of your computer wirelessly, connect your
frame to your wireless home network.
NOTE: If you are not sure you have a wireless network, ask the person who set up your computer.
If you have problems with your wireless setup or connection, see
Troubleshooting starting on
page 63 . Or open KODAK EASYSHARE Digital Display
Software on your computer (see page 8 ) and click Tools
→
Wireless Troubleshooter.
Follow the automated troubleshooting wizard.
Connecting to your wireless network—first time
The first time you turn on your frame, the wireless setup screens automatically appear
after you set your language and tap Save (see
page 4 ).
The frame scans for available networks and then your available networks are listed.
If your wireless network is not listed, follow the directions on page 8 , then return to this
page and resume this connection procedure.
1 Slide or tap below the arrows to highlight your home network, then tap OK.
NOTE:
If the scan finds multiple
networks, your home
network is usually listed first
and highlighted.
Networks are listed by % of
signal strength.