Kodak 6B6640 - Manual (Page 62)

Using Additional Calibration Features
3-32 March 2001
Editing Information on the DP2 (NT Systems) or KPIS
(MACINTOSH Systems) Tab
The DP2 (or for MACINTOSH Systems, KPIS) tab specifies whether to activate
DP2 (or KPIS) interoperability, and if so, names the directory and filename
designated for the DP2 (or KPIS) information.
There are minor differences in the editing of DP2 and KPIS information.
Editing DP2 Information (NT Systems)
When you click the DP2 tab of the Edit Configuration window, the tab is displayed.
The values in the example are the default settings.
To edit the configuration information on the DP2 tab:
1. If DP2 is not already activated, click the Activate DP2 checkbox (click again
to deactivate) so that the dialog box looks like the example above.
2. To change the DP2 Location, type a new directory name or click Browse and
select another directory.
3. If needed, change the DP2 Filename.
4. If you have completed all editing (including information on the other tabs),
click OK to save the changes and close the Edit Configuration window. (Or,
click Cancel to cancel all changes.)
5. To make other changes to the Edit Configuration, click another tab and make
changes as needed.
Attribute Description
Activate DP2 Indicates if the calibration procedure should generate a LUT file to be used with the
DP2 system. When you select Operations->Send LUT or Operations>Master
Balance, the LUTS are also sent to the DP2 location to be used with the DP2 system.
DP2 Location Directory to contain generated LUT files for use with DP2
DP2 Filename Name of the file containing the DP2 LUT files