Kodak 6B6640 - Manual (Page 33)

Using Additional Calibration Features
March 2001 3-3
NOTE: The installation is similar for NT and Macintosh systems. When the
instructions say, for example, click Next or Install, the first option is for NT
systems and the second is for Macintosh systems.
CAUTION: To avoid possible damage, do not connect or disconnect the cable
between your host computer and the printer when either device
is powered up.
7. Open the installation file (KODAK PROFESSIONAL Device Calibration.exe).
The display shows a splash screen for KODAK PROFESSIONAL Device
Calibration and a Setup message.
8. After the Welcome screen is displayed, click Next or Continue.
9. For Macintosh systems only, read the readme information, then click
Continue.
10. Read the license agreement.
• To accept the terms and continue the installation, click Yes or Agree.
• Or, to cancel the installation, click No or Disagree.
11. For NT systems only, read the readme information, then click Next.
12. Select the installation type:
For NT systems, select one of the following:
NOTE: The Compact option is not supported.
• Typical includes Device Calibration Applications for the Kodak
Professional LED Printer and for the Kodak Professional
Digital Mutliprinter, plus the Linearization Calibration
Application for the Kodak Professional RFS 3570+ (Speed
Up) Film Scanner
• Custom allows you to choose specific features for the application you
choose to install, including the Centralized Densitometer
Application; for the LED Printer, you may choose to install
either Gen I or Gen II.
For Macintosh systems, select Easy Install.