Kodak 6B6640 - Manual (Page 50)

Using Additional Calibration Features
3-20 March 2001
The display shows the Choose Master Balance LUT dialog box.
IMPORTANT: In the next step, do not select the default LUT.
5. Select one of the LUTs from the dialog box and click Load Selected LUT or
click Load Custom LUT and follow the prompts to load a custom LUT.
A new LUT is calculated based on the selected LUT and the input DRGB
values. The LUT is downloaded to the printer, overwriting the current LUT.
This LUT will be the current printer LUT until a new LUT is sent.
Sending LUTs
The Send LUT to Printer feature allows you to overwrite the current LUT in the
printer. You can create a valid printing LUT using an ASCII text editor. This option
sends the selected LUT to the printer, overwriting any existing LUT.
To send a LUT to the Printer:
1. From the Device Calibration window, double-click the device for which you
want to send a LUT.