Satellite radio tuner (optional accessory) control – Kenwood KDC-448U User Manual
Page 60
60
|
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
Channel scan
Every receivable Channel is checked for 10 seconds.
1
Start Channel Scan
Press the [ ] button for at least 1 second.
2
Release it when the channel you want to listen
to is received
Press the [ ] button for at least 1 second.
Function of remote control
Direct access tuning
Entering the channel and tuning.
1
Enter Direct access tuning mode
Press the [DIRECT] button on the remote
control.
2
Enter the channel
Press the number buttons on the remote
control.
3
Search the channel
Press the [
4] or [¢] button on the remote
control.
Cancelling Direct access tuning
Press the [
] button on the remote control.
⁄
•
If you make no button operation for 10 seconds, the Direct
Access Tuning mode is automatically canceled.
•
If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
“Acquiring Signal” appears.
Satellite radio tuner (Optional accessory) control