Kenwood KDC-448U - Manual (Page 54)

54 |
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
HD Radio™ tuner control
Function of KTC-HR300, KTC-HR200, KTC-HR100 (Optional Accessory)
Basic Operation
Selecting HD Radio source
Press the [SRC] button.
Select the “HD RADIO” display.
Selecting the band
Push the Control knob towards down.
Switches between the FM1, FM2, FM3, and AM
bands each time you push towards down.
Selecting the station
Push the Control knob leftward and rightward.
⁄
• The tuning mode can be changed. Refer to
setting> (page 56) .
• During reception of stereo stations the “ST” indicator lights
up.
Station preset memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset memory mode
Press the [PRESET] button.
“Preset List” is displayed.
3
Select a number and store it in the memory
Turn the Control knob to select memory
number (“1” – “6”), and then press the Control
knob for at least 2 seconds.
Cancelling the Preset memory mode
Press the [ ] button.
⁄
• If you press the [PRESET] button twice in step 2, Mix Station
preset mode is entered with “Mixed Preset List” displayed.
In this mode, different bands and tuner sources (Radio,
Sirius, XM etc.) can be saved in the same preset layer, which
allows you to recall the desired station without switching
the bands or tuner sources.
Maximum of six stations can be preset in the Mix Station
preset mode.
Once the Mix Station preset mode is set, you can enter the
same mode by just pressing the [PRESET] button once in
step 2.
Pressing the [PRESET] button twice returns to the normal
Station preset mode.