Kenwood KDC-448U - Manual (Page 58)

58 |
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
Satellite radio tuner (Optional accessory) control
Basic operation
Selecting Satellite Radio source
Press the [SRC] button.
Select the “SIRIUS” or “XM” display.
⁄
• You need to register to the service provider to receive the
service by Satellite Radio. Consult the service provider if
“CALL … TO SUBSCRIBE” appears.
• The radio may take a little time to start receiving after you
select the Satellite Radio source.
• If the signal reception fails, “Acquiring Signal”/ “No Signal”
appears.
Selecting the channel
Push the Control knob towards right or left.
Selecting the preset band
Push the Control knob towards down.
Each time you push the knob, the preset band
alternates between the SR1, SR2, SR3 and SR4.
Category and Channel search
Selecting the channel and category you want to
receive.
1
Enter Category and Channel search mode
Press the [ ] button twice.
2
Select the Category
Turn the Control knob to select Category, and
then press the Control knob.
3
Select the Channel
Turn the Control knob to select Channel, and
then press the Control knob.
Cancelling Category and Channel search mode
Press the [ ] button for at least 1 second.
⁄
• You cannot Channel search until the category information
is acquired.