Kenwood KDC-448U - Manual (Page 40)

40 |
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private mode
Push the Control knob towards right or left.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn the Control knob.
Call waiting
Answering another incoming call with the
current call suspended
KDC-X895 KDC-BT848U
Press the [ ] button.
KDC-X595 KDC-448U
1) Press the Control knob.
2) Turn the Control knob to select “Answer”, and
then press the Control knob.
Answering another Incoming call after
terminating the current call
Press the [SRC] button.
Continuing the Current Call
1) Press the Control knob.
2) Turn the Control knob to select “Reject”, and
then press the Control knob.
Answering the waiting call after terminating
the current call
KDC-X895 KDC-BT848U
Press the [ ] button.
KDC-X595 KDC-448U
Press the [SRC] button.
Switching between the current call and waiting
call
Press the Control knob.
Each pressing of this knob switches the calling
party.
Operation of hands-free phoning
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory)