Operation of hands-free phoning, Before use, Registering cell-phone – Kenwood KDC-448U User Manual
Page 36
36
|
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
Operation of hands-free phoning
Before use
KDC-X895/ KDC-BT848U
• If your cell-phone is not yet registered, register (pair)
it by referring to
in the Quick Start Guide or
(page 36)
in this document.
• To register a new cell-phone, you can also refer to
.
KDC-X595/ KDC-448U
• If your cell-phone is not yet registered, register (pair)
it by referring to
in the Quick Start Guide or
device> (page 46)
in this document.
⁄
• For details on the Bluetooth cell-phone with the
hands-free function, see
(page 65)
.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory)
Function of KDC-X895, KDC-BT848U
Registering cell-phone
1
Enter Bluetooth mode
Press the [ ] button for at least 1 second.
If your cell-phone is not yet registered, the search
for a cell-phone starts with “Searching” displayed.
Paring with new cell-phone
Turn the Control knob to select “Device Search”,
and then press the Control knob.
The search for a cell-phone starts with “Searching”
displayed.
2
Select the used cell-phone
Turn the Control knob to select cell-phone
name, and then press the Control knob.
3
Input the PIN code
Operation type
Operation
Select the numbers.
Turn the Control knob.
Move to the next digit.
Push the Control knob towards right.
Delete the last digit.
Push the Control knob towards left.
Transmit the PIN code.
Press the Control knob.
Pairing completes with “HF Connect” displayed.
⁄
•
When any error code is displayed while the paring is in
progress, refer to
.