Kenwood KDC-448U - Manual (Page 32)

32 |
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
General operation
Auxiliary input display setting
Sets the display when switched to AUX source.
1
Select the AUX source
Press the [SRC] button.
Select the “AUX” display.
2
Enter Function setting mode
Press the Control knob for at least 1 second.
3
Select the Name set mode
The item can be selected and determined as
follows.
“Settings”
> “AUX Name Set”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
4
Sets the display of the AUX source
Turn the Control knob to select Auxiliary input
display, and then press the Control knob.
Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or
“TV”.
5
Exit Function setting mode
Press the [
] button for at least 1 second.
Function of KDC-X595, KDC-448U
Muting the audio upon reception of
phone call
The audio system automatically mutes when a call
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
(page
12) of Quick start guide.