Kenwood HM-582MD User Manual

Page 33

Recording on MD

Knowledge section

Preparation section

Application section

Basic section

Contents

r e

Make the preparations for recording.

TUNER (Broadcasts) : Select a station
CD

: Enter pause mode at the beginning of the track

to be recorded.

AUX
Analog recording

: Make preparation for tuning or playback.

∏

Digital recording

: Set the MONITOR mode of the menu to “ON”

then make preparation for tuning or playback.

›∏

Start recording.

1 Press the rec key. (the unit enters record-pause mode)

3 Play (or tune) the music source to be recorded.

After recording , eject the MD.

÷ Be sure to eject the MD after recording. The data on the recording is written in the

MD while “WRITING” is displayed, then the disc is ejected.

While “WRITING” is displayed, do not apply shock or vibra-
tion to the unit because information is being written on the
Mini Disc.

Note

Pause the recording

Stop the recording

÷ If the key is pressed during recording from a CD, the CD

playback also stops.

÷ The recording format can be selected according to the input source as required.

(REC INPUT)

›

÷ The input level of an external input source can be selected as required.

(AUX A. LEVEL/AUX D. LEVEL)

ﬁ

÷ When recording an MD, the track number assignment can be selected as required.

(REC TNO MARK)

›

÷ In record-pause mode, press the same key again to resume

recording from the same position. Note that the track
number increments at this time.

÷ Recording can also be started by pressing the rec key.

÷ When recording CD playback, pressing the CD 6 key lets

both MD recording and CD playback pause temporarily. To
resume the CD playback and MD recording together, press
the CD

6 key again.

2 When the preparation is complete, press the rec key again.

÷ When the input source is a CD, the MD recording starts at the same time as the

6 key is pressed. (Synchronized recording)