Kenwood HM-582MD - Manual (Page 26)

26
Preparation section
Basic section
Apprication section
Knowledge section
Receiving broadcast station
Contents
Press
¢ for the order of
1 =2=3 ... 38=39=40=1...
Press 4 for the order of
40
=39=38 ... 3=2=1=40...
3 3
1. Select the tuner input.
Each press of the TUNER/BAND key switches the band as follows.
FM
AM
Receiving broadcast station
One-by-one presetting
Presetting R.D.S.stations
(auto memory)
Tuning a non-preset
radio station
TUNER
/BAND
› $
1 1
1 1
3 3
2. Preset a radio station in memory .
÷ Once stations are stored by auto memory, the present procedure is not
required from the next time, unless you move of house or re-execute presetting
of all tunable stations.
Follow the procedure in “Presetting R.D.S.stations (auto memory)” to
preset automatically the tunable radio stations in your area.
¶
Presetting R.D.S.stations (auto memory)
If radio stations have already been stored
with auto presetting or manual presetting,
select a station using the
4,¢ key.
Each press of the same key switches the
preset stations in sequence.
3. Tuning (Preset Call)
÷ To select a preset station from the remote,
use the
4, ¢ key or numeric keys. Lights during stereo reception
AU TO
FM P08
BAYERN 3
TONE
STEREO
A.P.S.
12:30PM
RDS
Tuning indicator lights up
when a station is received.
A station can also be tuned even when it is not preset. For details, read
“Tuning a non-preset radio station (Auto tuning, Manual tuning)”
•
One-by-one presetting (manual preset) •