Kenwood TK-5320 - Manual (Page 41)

28
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
v
oice
r
ecorder
The voice recorder allows you to record conversations and
create voice memos.
■
Auto Recording
If activated, the auto recorder will continuously record all
transmitted and received signals. The recording storage
area retains only the last 30 seconds of recording.
■
Voice Memos
To record a voice memo for later playback:
1 Press the key programmed as Voice Memo, or access
the Menu {page 2}.
• The duration of recording memory will appear on the
display and begin counting down.
2 Speak into the microphone to record your memo.
3 Press
to end the recording and store it in memory.
• If the memory becomes full, recording will stop and the
voice memo will be stored in memory.
■
Auto Reply Message
You can set the transceiver to automatically respond to
Individual Calls while using FleetSync.
1 Press the key programmed as Auto Reply Message to
enter Auto Reply Message mode.
2 When you receive an Individual Call, the transceiver will
send an automatic response to the caller after
3 seconds, and “GREETING” appears on the display.
• If you are available to receive the call, press any key to
cancel the auto response.