Kenwood TK-5320 - Manual (Page 22)

BASIC OPERATIONS
S
witching
p
ower
on/oFF
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the
Power switch/ Volume control counterclockwise fully
to switch the transceiver OFF.
■
Transceiver Password
If the transceiver is password protected, “PASSWORD” will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the password:
1 Select a character using
/ .
• On keypad models, you can enter the password directly.
2 Press to enter the selected character.
• This step is unnecessary when using the keypad.
3 Repeat steps and 2 to enter the entire password.
• Press or # to delete a character. Press and hold or
# to delete all characters.
4 Press or to confirm the entry.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of digits.
A
djuSting the
v
olume
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.