Bcl), Ptt id – Kenwood TK-5320 User Manual
Page 40
27
c
ompAnder
If programmed by your dealer for a channel, the compander
will remove excessive noise from transmitted signals, to
provide higher clarity of signals.
B
uSy
c
hAnnel
l
ockout
(Bcl)
If BCL is set up by your dealer, you will be unable to transmit if
the channel is already in use. Use a different channel or wait
until the channel becomes free.
If BCL Override has been programmed, you can transmit over
the current signal:
1 Press and hold the PTT switch.
• If the channel is already in use, a warning tone will sound.
2 Quickly release and then press the PTT switch again.
3 Speak into the transceiver as you would during a normal
call.
ptt id
PTT ID is the transceiver unique ID code which is sent each
time the
PTT switch is pressed and/or released.
Note: PTT ID can be made only in analog operation.