Kenwood TK-5320 - Manual (Page 21)

8
• Operator Selectable Tone [OST]
• Playback [PLAY] 2
• Priority-channel Select [OSP]
• Scan [SCAN]
• Scan Delete/Add [D/A]
• Selcall [SELCAL]
• Selcall + Status [SEL+ST]
• Selcall + Short Message [SEL+SD]
• Send the GPS data [GPS TX]
• Speaker Attenuation
• Squelch Level [SQL]
• Squelch Off [SQ OFF]
• Squelch Off Momentary [SQ OFF]
• Stack [STACK]
• Status [STATUS]
• Short Message [SDM]
• Talk Around [TA]
• Talkgroup [TALKGP]
• Talkgroup Reset
• Transceiver Password [PASSWD]
• Vibrator [VIB]
• Voice Memo [MEMO] 2
• Volume Down
• Volume Up
• VOX [VOX]
• Zeroize [ZERO] ,
• Zone Delete/Add [ZN D/A]
• Zone Down [ZONEt]
• Zone Up [ZONEs]
Available only for Analog operation.
2 Available only if the VGS- optional board has been installed.
3 Can be programmed only on the Auxiliary key and the optional
speaker/ microphone PF (orange) key.
Available only for P2 operation.
Can be programmed only on the microphone programmable function
keys.
Available only if the Secure Cryptographic Module (SCM) optional
board has been installed.