Kenwood TK-5320 - Manual (Page 30)

7
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by Kenwood Corporation.
Note: This function is available only in analog operation.
S
elcAll
(S
elective
c
Alling
)
A Selcall is a voice call to a station or group of stations.
■
Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press / to select the station you want to call.
• On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT switch and begin your conversation.
■
Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station’s ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
■
Identification Codes
An ID code is a combination of a 3-digit Fleet number and a
-digit ID number. Each transceiver has its own ID.
• Enter a Fleet number (00 ~ 3) to make a group call.
• Enter an ID number (000 ~ ) to make an individual call in
your fleet.
• Enter a Fleet number and select “ALL” ID to make a call to all
units in the selected fleet (Fleet call).
• Select “ALL” Fleet and enter an ID number to make a call to
the selected ID in all fleets (Supervisor call).
FleetSync:
ALPHANUMERIC 2-WAY PAGING FUNCTION