Konica Minolta 7013 - Manual (Page 99)

Advanced features
Erasing a programmable one-touch key
1 Press Program key, A , 3, 0, 2, ENTER . The LCD shows the first programmable
one-touch number that has been programmed:
Note: If P2 appears, it means P1 is empty.
2 Press the programmable one-touch key you want to erase. Here, we’ve
selected P2:
3 To erase a different programmable one-touch key than the one that appears
on the
LCD , press that key now.
4 Press ENTER . The LCD shows:
Important: If you want to quit without erasing the programmable one-
touch key you’ve selected, press CANCEL . The fax will return to
step 2.
5 Press ENTER to erase the number.
To erase another programmable one-touch key, repeat steps 2–5. Or press STOP to
return to standby mode.
Erase P One-Touch
** Complete **
P2:Erase P One-Touch
Check Enter/Cancel
Select Program No.
P2:Polling
Select Program No.
P1:Delayed
3.48