Konica Minolta 7013 User Manual

Page 66

Advanced features

Limiting polling access to your fax machine

When you set the passcode, a calling fax which doesn’t “present” the proper pass-
code cannot poll from your fax.

Important: The passcode you use for polling operation is not the same as the pro-

tection passcode (see page 3.49).

Note: If you’re using the Block Junk Fax feature (see pages 3.53–3.54), even

incoming calls which meet the passcode test must come from phone num-
bers you’ve approved.

To set your fax machine’s passcode:

Decide on the four-digit passcode (0001–9999) you want to use. Write it down,
and put it in a safe place.

Press Program key,

, 2, 1, 3,

ENTER

. The

LCD

shows the current code:

Use the numeric keypad to enter the desired four-digit passcode.

Press

ENTER

to save the setting.

Note: To turn off the limiting polling, change the passcode to 0000 by repeating

steps 1–4 and entering 0000 in step 3.

Passcode
Passcode :5627

Passcode
Passcode :0000

3.15