Konica Minolta 7013 - Manual (Page 21)

1.10
Getting started
6 Press or until the recording paper size for the bypass tray you want
appears. In this example, we’ve chosen A4.
7 Press ENTER .
Press STOP to return the machine to standby mode.
Loading paper in bypass tray
When you need to use a size of paper not currently loaded in your machine’s paper
cassette(s), or when you want to use a special type of paper (such as transparency
film), use the bypass tray.
1 Open the bypass tray on the right
side of your machine.
2 Pull out the hopper of the bypass
tray and pull the flapper release
lever.
3 Place the paper on the bypass
tray. Adjust the paper guide to fit
the paper and insert the paper
until it comes to a stop.
Then push back the flapper
release lever.
Note: In Fax mode, if you have set the A4, A5 or F4 sized paper in the bypass
tray, the machine will use this paper when it runs out of the paper in the
paper cassette during the fax reception.
Bypass Tray :A4
/ /Enter