Konica Minolta 7013 User Manual
Page 92
Advanced features
12
If you want the transmission to begin immediately every time you press the
key, press
ENTER
and skip to step 15.
If you want to delay the transmission, press
ADVANCED FUNCTIONS
,
ENTER
.
13
Next, tell your fax to carry out this delayed command one of these ways:
Option 1:
Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM
on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2:
Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM
today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax should perform the command:
14
Press
ENTER
,
ENTER
.
15
The
LCD
asks if you want to make additional settings for this programmable
one-touch number.
If you do not want to make additional settings, press
ENTER
. Skip to step 29.
If you do want to make additional settings, press
and
ENTER
.
16
The
LCD
asks which resolution you want to use for this programmable one-
touch number.
17
Press
until the mode you want appears.
Note: For any of the following settings, choose “-----” if you do not want to
specify the displayed setting for this programmable one-touch key.
18
Press
ENTER
. The
LCD
asks you to select a contrast mode for each programma-
ble one-touch number.
19
Press
until the mode you want appears.
20
Press
ENTER
. The
LCD
asks if you want the memory transmission on or off
when using this programmable one-touch number.
21
Press
until the mode you want appears.
22
Press
ENTER
. The
LCD
asks you for the type of confirmation report you want to
set for this programmable one-touch number.
23
Press
until the mode you want appears.
24
Press
ENTER
. The
LCD
asks if you want to send a cover page for this program-
mable one-touch number.
25
Press
until the mode you want appears.
26
Press
ENTER
. The
LCD
asks if you want to turn the Fax & Copy feature on or
off for this programmable one-touch number.
Note: When the memory transmission is set to off in step 20, this
LCD
will
not appear and go to step 29.
27
Press
until the mode you want appears.
28
Press
ENTER
.
29
Press
STOP
to return your machine to standby mode.
Fax & Copy :---
/
/Enter
Cover Page :---
/
/Enter
Report :---
/
/Enter
Memory Tx :---
/
/Enter
Contrast :-------
/
/Enter
Resolution :------
/
/Enter
Option :Off
/
/Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
3.41