Konica Minolta 7013 - Manual (Page 47)

2.16
Basic operation
Recording paper size
As default, your machine selects the paper source automatically, however if you
wish to select the paper source manually, press
PAPER SIZE repeatedly until your
desired paper size is displayed. The LCD toggles the paper size in the 1st cassette,
2nd cassette (if installed), the bypass tray and Auto select mode.
Note: If the bypass tray has no paper, the LCD shows “None” for the paper size of
the bypass tray.
Note: When you choose the auto paper select mode, the LCD
shows “Auto” and the all LED of the paper source will
be lit.
However, if the bypass tray has no paper and the
optional 2nd paper cassette has not been installed,
the machine will show the “ [(paper size)] ” instead
of “Auto” although you select auto paper select mode.
And it lights the LED of the paper source that can be
used only.
Select Document type
• PHOTO — Select this mode when copying photographs or
drawings.
• PHOTO / TEXT — Select this mode when copying documents
containing photographs or drawings with letters.
• TEXT — Select this mode when copying letters.
To select the document type, press DOCUMENT repeatedly.
A glowing LED indicates the machine is using the setting named by that LED .
Adjust image contrast
Setting the contrast allows you to compensate for any excessive light or darkness, of
the document pages you are copying.
To change the contrast setting, press CONTRAST repeatedly.
A glowing LED indicates the machine is using the setting named
by that LED .
Note: To avoid confusing the Light and Dark settings, just
remember — “Light lightens” and “Dark darkens” — to
keep it straight.
CONTRAST
NORMAL
LIGHT
DARK
PHOTO
DOCUMENT
PHOTO
/TEXT
TEXT
RESOLUTION