Kodak EasyShare printer dock - Manual (Page 47)

Troubleshooting
www.kodak.com/go/support 41
Picture size lights
Light status Cause Action/solution
One light glows steady
green The picture size is available and
selected. None required.
To change picture size,
push the Picture size button
repeatedly.
All lights are off There are no pictures in the
camera, on the card, or on the
PictBridge device. To enable the Picture size
option:
1 Take pictures.
2 Dock camera, or
connect Kodak 8-in-1
card reader or
PictBridge device
(
page 13 ). If using card
reader, make sure card
is inserted.
Camera is not docked, or Kodak
8-in-1 card reader or PictBridge
device is not connected.
Camera is not properly seated
on connector. Reseat the camera on the
printer dock (
page 10 ).
Camera or Kodak 8-in-1 card
reader is transferring pictures to
the computer, or has established
an active connection to the
computer. None required.