Kodak EasyShare printer dock - Manual (Page 16)

Preparing your EasyShare digital camera
10 www.kodak.com/go/support
Docking and charging your EasyShare digital
camera
The Kodak EasyShare printer dock is compatible with Kodak EasyShare
CX/DX6000/7000 series and LS600/700 series digital cameras.
Docking your camera lets you make prints directly from the camera, transfer
pictures from the camera to the computer, and charge the camera battery.
1 Make sure a dock insert is installed on the printer dock (see page 2 ), and a
dock-rechargeable battery is installed in the camera (see page 8 ).
2 On the camera bottom, find the dock
connector and locator hole.
3 Place the camera in the printer dock, making
sure to align the dock connector and locator
hole with the camera connector and locator
pin. Push down to seat the connector.
The camera is now powered by the printer dock
instead of the camera battery.
■ The Kodak EasyShare Ni-MH rechargeable
battery pack and the Kodak EasyShare Li-Ion
rechargeable battery charge up to 3 hours.
■ The Battery charging lights turn on as
charging progresses. Charging is complete
when all three lights are lit.
■ You may leave the camera in the printer dock
to maintain the charge.