Kodak EasyShare printer dock User Manual
Page 38
Troubleshooting
32
www.kodak.com/go/support
Printing stops
during mid-print
(paper stops
feeding, and Paper
light may blink)
IMPORTANT: Use only Kodak color cartridge & paper kits
with your printer dock. Do not use inkjet
paper.
■
Check the paper:
1
Remove the paper tray (
).
2
Check the paper slot on the back of the printer dock.
3
Remove loose paper from the printer dock. If paper is
jammed, see
.
4
Inspect the paper supply: make sure removable tabs have
not been detached from the paper. Reload with new
paper if necessary.
5
"Fan" the paper to keep the sheets from sticking
together.
6
Reload the paper tray using no more than 25 sheets.
7
Re-install the paper tray, then press to resume
printing.
■
Clean the feed roller (
).
Print is smudged
■
Fingerprints may be on glossy side of paper. Handle paper by
the edges or by the removable tabs (
).
Print is spotted
■
Check to see if the paper is dirty, and use a dry, lint-free cloth
to wipe clean.
For excessive dirt or debris, thoroughly clean the paper tray,
and load new paper (
).
■
When storing, remove and close the paper tray and paper
tray door to keep dust and debris from collecting on the
paper or inside the printer dock (
If...
Try the following