Kodak EasyShare printer dock - Manual (Page 27)

Installing software and connecting to a computer
www.kodak.com/go/support 21
Connecting to a computer
A USB cable is required to connect to a computer. Use the USB cable that
came with your Kodak EasyShare camera. To purchase one separately, see a
retailer of Kodak products, or visit
www.kodak.com/go/accessories .
IMPORTANT: Make sure your camera is NOT in the printer dock when you are
connecting to the computer.
1 Make sure the power is connected to the printer dock (see page 3 ), and
Kodak EasyShare software is installed on the computer (see page 18 ).
2 Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3 Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.