Kodak EasyShare printer dock - Manual (Page 19)

www.kodak.com/go/support 13
3
Printing without a
computer
IMPORTANT: Wait until printing is complete before removing prints, the paper
tray, or the camera. Failure to do so can cause paper misfeeds or
jams and can damage the printer dock.
Printing from your EasyShare digital camera
1 Make sure the power is connected, and the color cartridge and paper are
loaded (see Chapter 1, Getting started ).
2 Take a picture with your camera (see your camera user’s guide).
3 Place the camera in the printer dock (see page 10 ).
The current or most recent picture appears on the camera screen.
■ To review and choose a different picture to print, press the Left/Right
control on the printer dock,
.
4 Press the Print button, .
The copy screen appears.
■ To print more than one copy, press to select the number of
copies, then press .
(If you don’t press any buttons, after 10 seconds printing starts
automatically.)
Printing starts.The paper cycles four times during
the printing process before the finished print is
ejected. The first three passes apply layers of
yellow, magenta, and cyan colors to the print,
and the fourth pass applies a clear coating that
protects and preserves the image.