Kodak EasyShare printer dock - Manual (Page 10)

Getting started
4 www.kodak.com/go/support
Handling and storing the color cartridge
■ For best quality prints, store the color cartridge in a location where the
temperature does not exceed 85
°
F (30
°
C).
■ To avoid getting fingerprints on the ribbon, handle the color cartridge by
the spool ends.
■ Keep the color cartridge away from direct sunlight and out of
high-temperature environments (such as a vehicle parked in the sun).
Installing and removing the color cartridge
IMPORTANT: Use only Kodak color cartridge & paper kits with your printer dock.
Do not force the cartridge in or out of the printer dock. Doing so
may damage the cartridge or the printer.
To install the color cartridge:
1 Open the cartridge door on the side of the printer dock.
2 Check to make sure there is no slack in the
color cartridge ribbon.
To remove slack, push in on the cartridge
spool, then rotate the spool clockwise.
IMPORTANT: Be careful not to rotate the spool
more than necessary. Doing so could
reduce the number of prints you are
able to make.
3 Slide the color cartridge in, label side up, with
the arrow pointing toward the printer dock.
Push the cartridge until it "clicks" into place.
4 Close the cartridge door.