Kenwood ProTalkXLS TK-3230 - Manual (Page 55)

6
B
uSy
c
hAnnel
l
ockout
(Bcl)
This function is used in order to prevent transmitting on a
channel that somebody else is currently using. When turned
ON, a beep sounds when you press the PTT switch while
another party is using the channel, and you cannot transmit.
To turn BCL on or off:
With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
Press the or key to select “ ”.
Press the MENU key then press or to select “ ”
(BCL on) or “ ” (BCL off).
Press the MENU key to exit the selection.
Press the PTT, MON, or CAL key to exit Setting Mode.
B
eep
t
one
When you turn the transceiver power ON or press a key, a
beep will emit from the transceiver.
To turn the beep tone on or off:
With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
Press the or key to select “ ”.