Ptt id s – Kenwood ProTalkXLS TK-3230 User Manual
Page 43
Press the MENU key to exit the selection.
Press the PTT, MON, or CAL key to exit Setting Mode.
Note: Transceiver's individual ID number is not available for
selection as PTT ID.
■
ptt id S
ide
t
one
When the
PTT switch is pressed and/or released, a tone
will sound through your own speaker when the PTT ID is
transmitted.
To turn the PTT ID Side Tone on or off:
With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
Press the or key to select “ ”.
Press the MENU key then press or to select
“
” (PTT ID Side Tone is on) or “
” (PTT ID
Side Tone is off).
Press the MENU key to exit the selection.
Press the PTT, MON, or CAL key to exit Setting Mode.
This manual is related to the following products: