Kenwood ProTalkXLS TK-3230 - Manual (Page 22)

getting Started
q Switch the Power ON.
Switch the transceiver power ON by turning
the Power switch/ Volume control clockwise.
• A confirmation tone sounds, the LCD lights up
momentarily, then the current channel number
is displayed.
To switch the transceiver power OFF, turn
the Power switch/ Volume control fully
counterclockwise, until a click sounds.
w Adjust the Volume.
Set your desired volume level by rotating the
Power switch/ Volume control.
• Clockwise increases the volume and
counterclockwise decreases the volume.
Note: To adjust the volume using background noise
as a reference, use the Monitor function {page 19}.
e Select a Channel.
Select a channel by pressing the or
keys.
• A confirmation tone sounds each time you
press the or key.