Kenwood ProTalkXLS TK-3230 - Manual (Page 44)

■
m
ute
h
old
t
ime
Mute Hold Time keeps the speaker muted for a brief
moment, after a signal has been received. This prevents
interference with the PTT ID signal.
To set the hold time:
With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
Press the or key to select “ ”.
Press the MENU key then press or to select
“ ” (hold time is off), “ ” (500 ms), “ ”
(1000 ms), “ ” (1500 ms), “ ” (2000 ms), or
“ ” (2500 ms).
Press the MENU key to exit the selection.
Press the PTT, MON, or CAL key to exit Setting Mode.