Kenwood ProTalkXLS TK-3230 - Manual (Page 45)

6
■
c
Aller
id d
iSplAy
When the transceiver receives a PTT ID signal, the caller
ID of that signal appears on the display, along with the
icon, so you know who is making the call.
To turn Caller ID Display on or off:
With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
Press the or key to select “ ”.
Press the MENU key then press or to select
“ ” (Caller ID Display is on) or “ ” (Caller ID
Display is off).
Press the MENU key to exit the selection.
Press the PTT, MON, or CAL key to exit Setting Mode.