Convenience, Set time and date format, Set date and time – Kyocera G2GO User Manual
Page 71: Enable airplane mode, Auto keyguard, Enable auto-hyphenation
User Guide
71
Set Time and Date Format
From Time/Date Format, select a time and
date format.
Convenience
Use these settings to make your phone more
convenient to use.
Set Date and Time
In Airplane mode, you can set the time and date
manually.
Note: You can only access Set Time/Date with
Airplane Mode enabled.
1. From Set Time/Date, do the following to
change the date:
– Scroll left or right to move between the
month, day, and year fields.
– Scroll up or down to change the month,
day, and year.
2. Press the OK key to save the date.
3. Do the following to change the time:
– Scroll left or right to move between the
hour, minute, and AM/PM fields.
– Scroll up or down to change the hour,
minute, and AM/PM.
4. Press the OK key to save the time.
5. Select Done.
Enable Airplane Mode
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control.
In airplane mode, however, your phone does not
emit RF signals. You cannot make or receive
calls, send text messages, use the Browser or
Bluetooth, but you can play games, use the
Scheduler, set the clock, and make emergency
calls to designated emergency numbers. Please
check with uniformed personnel before
operating your phone in Airplane mode.
From Airplane Mode, select Enabled > OK to
activate airplane mode.
With airplane mode enabled, you can also set
the time and date manually.
Auto Keyguard
Enable Auto Keyguard
Use Auto Keyguard to automatically lock the
keypad after 30 seconds of inactivity to prevent
accidental key presses.
From Auto Keyguard, select Enabled or from
the home screen, press and hold the Back key.
Unlock Keyguard
From the home screen, select Unlock and press
the OK key to unlock the keypad.
Enable Auto-Hyphenation
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan (or the
North American Numbering Plan).
From Auto-Hyphen, select Enabled to turn on
auto-hyphenation.