Kyocera G2GO - Manual (Page 11)

User Guide 11
Memory Card
Install the Memory Card
To install the memory card:
1. With the front of the
phone facing you, locate
the rubber memory card
cover on the lower right
hand side.
2. Remove the cover.
3. Insert the memory card
with the metal contacts facing toward the
front of the phone until it is securely in
place.
Note: With a memory card installed properly,
the memory card icon appears at the top of the
screen.
4. Put the rubber cover back into place.
Warning: Inserting a memory card improperly
may damage the phone.
Format the Memory Card
From Accessories, select Memory Card >
Format Card > Yes to format your memory
card.
Note: Formatting will erase all current
information on the memory card.
Remove the Memory Card
To remove the memory card:
1. Remove the rubber
memory card cover.
2. Use your finger nail to
press and release the
memory card in the slot
until it bounces
outward.
3. Carefully take the memory card out of the
slot.
4. Put the rubber cover back into place.